A wild ride in 2015 - and two steps forward in 2016

By Denny McGuirk, SEMI president and CEO

“In like a lion, out like a lamb” is just half the story for 2015.  While initial expectations forecasted a double-digit growth year, the world economy faded and dragged our industry down to nearly flat 2015/2014 results.

However, 2015 will be remembered for a wild ride that fundamentally changed the industry.  In 2015 a wave of M&A activity swept across the industry supply chain — unlike any single year before — with scores of transactions and notable multi-billion dollar companies being absorbed.  In 2016, we all will be working within a newly reconfigured supply chain.

Increasingly, in this business landscape, collaboration is required simultaneously across the extended supply chain — customers’ customers’ customers are now routinely part of the discussion in even unit process development.  Facilitating interaction and collaboration across the extended supply chain is part of what SEMI does and I’ll be updating you in next week’s letter on how, but first, let’s review what’s happened and what’s happening.

2015 Down 1%: “In Like a Lion, Out Like a Lamb”

2015 had an optimistic start with a strong outlook and good pace in Q1 and 1H.  In January 2015 forecasters projected semiconductor equipment and materials growing in a range of 7 percent to nearly 14 percent vs. 2014.  Global GDP, as late as May 2015, was pegged at 3.5 percent for 2015 after coming in at only 3.4 percent in 2014.  In August, estimates dropped to 3.3 percent, in November estimates dropped further to 3.1 percent for the year.

As our industry has matured, semiconductor equipment and materials growth rates are ever more tightly correlated to shifts in global GDP.  With global GDP unexpectedly dropping, the second half saw declining book-to-bill activity and the year will likely end flat or slightly negative for 2015.  Though nearly flat, the numbers are still impressive with a healthy $37.3 billion annual revenue for semiconductor manufacturing equipment and $43.6 billion for semiconductor materials.

An important change is since the 2009 financial crisis, electronics, chips, and semiconductor equipment and materials markets have been much more stable year-to-year than in the years prior to 2009.  Also, the movement of the three segments is much more synchronized compared to the earlier years of boom and bust. For SEMI’s members this means cycles are becoming more muted — enabling members to shift business models accordingly to better maintain prosperity.

Fab-Equipmt-600w Capital-Equip-600w


2015’s $125+ Billion M&A:  Inflection Point for Silicon Valley Icons and Global Titans

2015 is a year that will be viewed as an inflection point in our industry.  The unprecedented M&A volume (more than $125 billion for semiconductor related companies) and the size of individual deals through the electronics supply chain will forever  change the industry.


While there have been waves of consolidation for semiconductor Integrated Device Manufacturers (IDMs) in the 1980s and 1990s, and semiconductor equipment and materials in the 1990s and 2000s, the fabless semiconductor companies are the latest wave undergoing consolidation.  Although, in 2015, not just fabless, but all segments saw major deals — even iconic chemical brands DuPont and Dow Chemical announced their intention to merge.

Large and familiar brands like Broadcom (Avago), SanDisk (Western Digital), Altera (Intel), Freescale (NXP), and KLA-Tencor (Lam Research) have been merged and will continue forward as part of their acquirers.  China is on the move with its ambitions to quickly grow its indigenous semiconductor supply chain with recent acquisitions of ISSI, OmniVision, NXP RF power unit, and notably Mattson in the semiconductor equipment segment.

In an age when new fab costs are pushing double-digit billions of dollars and leading-edge device tapeouts are surpassing $300 million per part, consolidation is a strategy to increase scale, leverage R&D, and compete better.  For SEMI’s members, the winner-take-all stakes increase and raise expectations for technology, product performance, application development, speed, and support.  This, in turn, means that SEMI members have an increased need for a newly drawn pre-competitive collaboration model along the extended electronics supply chain and for Special Interest Groups (SIGs) to drive collective action in focused sub-segments and for specific issues.


Source: SEMI (www.semi.org), 2015

2016 Up ~1%: Stay Close to your Customer and your Customer’s Customer and …

Current projections for semiconductor equipment and materials suggest that 2016 will not be a high growth year.  The span of forecasts ranges from almost -10 percent to +5 percent.  At SEMI’s Industry Strategy Symposium (ISS), 10-13 January, we will be taking a deep-dive into the 2016 forecast and on the business drivers and will have a much better picture of the consensus outlook.

However, it is already quite clear that following this enormous wave of consolidation, the industry will look different and will offer new and different opportunities.  Listening to SEMI’s members, I’ve heard that during this period of upheaval it’s absolutely critical to stay close to one’s customers – but more than that – to have access and ongoing direct dialogue with the customer’s customer … and customers’ customers’ customers.

In light of the cost of research and development, the magnitude of risks, and the speed of new consumer electronics adoption, SEMI members find that they need to intimately know emerging requirements two to three steps away in the supply chain, and may require rapid and innovative development from their own sub-suppliers to meet product delivery in time.  In parallel, we see system integrators (electronics providers) staffing up with semiconductor processing engineers and equipment expertise, both for differentiation of their own products and for potential strategic vertical manufacturing.

2016 will mark an acceleration of collaboration and interdependence across the extended supply chain.  Next week, I’ll provide an update letter on SEMI’s related activities with an overview of what SEMI is doing to meet the realities of a reshaped industry.  SEMI’s role is evolving, and more important now than ever, in helping the industry achieve together, what it cannot accomplish alone.


Learn more about SEMI membership and upcoming events.


Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>


Versatile high throughput SEM from JEOL
11/04/2015JEOL's new JSM-IT100 is the latest addition to its InTouchScope Series of Scanning Electron Microscopes....
Versatile high throughput SEM from JEOL
11/04/2015JEOL's new JSM-IT100 is the latest addition to its InTouchScope Series of Scanning Electron Microscopes....
Greenpeak and Dusan Launch Smart Parking system
09/14/2015GreenPeak Technologies and Dusun Electron Ltd recently announced a partnership with the launch of their first Smart City assisted parking application tha...