Moore’s Law has stopped at 28nm

By Zvi Or-Bach, President & CEO of MonolithIC

While many have recently predicted the imminent demise of Moore’s Law, we need to recognize that this actually has happened at 28nm. From this point on we will still be able to double the amount of transistors in a single device but not at lower cost. And, for most applications, the cost will actually go up.

Let’s go back to 1965 and Moore’s paper in “Electronics, Volume 38, Number 8, April 19, 1965 The future of integrated electronics”. The following figure represented Dr. Moore’s observation with regard to three consecutive technology nodes. Quoting: …”the cost advantage continues to increase as the technology evolves toward the production of larger and larger circuit functions on a single semiconductor substrate. For simple circuits, the cost per component is nearly inversely proportional to the number of components, the result of the equivalent piece of semiconductor in the equivalent package containing more components. But as components are added, decreased yields more than compensate for the increased complexity, tending to raise the cost per component. Thus there is a minimum cost at any given time in the evolution of the technology.”


“The complexity for minimum component costs has in-creased at a rate of roughly a factor of two per year. Certainly over the short term this rate can be expected to continue, if not to increase. Over the longer term, the rate of increase is a bit more uncertain, although there is no reason to believe it will not remain nearly constant for at least 10 years”

The public information we now have indicates that:

a. The 28nm node is quite mature and we cannot expect that optimum integration vs. yield will double for it.

b. All that we know about the more advanced nodes (22/20nm, 16/14nm, …) indicates that the cost per transistor is not going to be reduced significantly vs. that of 28nm.

c. What we now know about embedded SRAM (“eSRAM”), I/O and other analog functions, indicates that most SoCs will end up at a higher cost as compared to 28nm.

Let’s recap using a few public charts to help tell the story of how we have reached that conclusion.

It starts with the escalating cost of lithography as illustrated in this 2013 chart from GlobalFoundries:


We should mention here that based on information released during last week’s SPIE Advanced Lithography (2014), it seems EUV is not going to be ready for the N+1 node (10nm). These costs, as well as other capital costs, increase, and thus drive up the wafer price as illustrated by the recent NVidia chart from Semicon Japan (Dec. 2013) below:


This escalating wafer cost eats away the higher transistor density gains, as articulated by NVidia and calculated by IBS’ Dr. Handel Jones and shown in the following table:


This is nicely illustrated by ASML slide from Semicon West (2013) below:


But this is just the smaller part of the problem. Advanced Integrated Circuits comprise far more than just logic gates. An SoC today contains a significant amount of embedded memories, I/Os and other support analog functions. Further, they include a large number of drivers and repeaters to reduce the RC delays that are escalating due to dimensional scaling. All of these scale very poorly.

The following chart was presented in an invited paper by Dinesh Maheshwari, CTO of Memory Products Division at Cypress Semiconductors, at ISSCC2014. It was also at the center of our recent blog “Embedded SRAM Scaling is Broken and with it Moore’s Law.”


This chart shows that eSRAM scaling is ~1.1X for decent performance as compared to ~4X for logic gates. The chart below (from Semico Research) shows that an average SoC has more than 65% of its die area allocated to eSRAM.


Consequently, the average SoC scaling to 16/14 nm could result in a significant cost increase, and hence 28nm is effectively the last node of Moore’s Law. To make things even worse, the remaining 35% of die area is not composed of only logic gates. More than 10% of the die area is allocated to I/O, pads and analog functions that either scale poorly or do not scale at all. And even in the pure logic domain scaling could not reach the potential 4X density improvements. The following chart was presented by Geoffrey Yeap, VP of Technology at Qualcomm, in his invited paper at IEDM 2013:


It illustrates the escalating interconnect RC delay with scaling - about 10X for two process nodes. This escalating RC delay eats away a significant part of the increase in gate density due to the exponential increase in buffer and driver counts and a similar increase in ‘white’ area kept for post layout buffer insertion, etc.

Final note: it seems clear that dimensional scaling has now reached negative returns, as is illustrated by the following GlobalFoundries chart:


The time is now to look for other alternatives, among which monolithic 3D seems a most compelling option. It allows us to leverage all our current silicon knowledge and infrastructure while continuing with Moore’s Law by scaling up at 28nm.


Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.

17 thoughts on “Moore’s Law has stopped at 28nm

  1. GMan_PA

    Well, that’s lukewarm information - the industry realized these facts over five years ago and _IS_ addressing it by 3D designs. Moore was well aware of basic semiconductor physics and quantum mechanics, so is the semiconductor industry. A MOSFET with a 2-unit cell thick oxide is a funny-acting tunnel diode, regardless of the design or the dielectric constant of the oxide.

    1. Zvi Or-Bach

      Well, the industry is moving forward with 20 nm, 14 nm and people are talking about 10 nm and 7 nm. It was important to point out that dimension scaling could be done but it will no provide cost reduction as it did prior to 28 nm and with that we have reached the end of Moore’s Law. The real point is not semantic but rather fanatical. This end of cost reduction might cause real crises in the high-tech business.

    2. peter gasperini

      I very respectfully disagree with your statement. Please do not take offense. Let me explain:
      Sure - 3D IC, TSV and - eventually - silicon level 3D circuitry is moving forward and will help. But they are, collectively, just a stopgap.
      Consider: there are three primary markets served by Silicon Valley: Consumer, Communications and Computing (the three C’s.) They’re all stagnant - Computing is continuing a long term trend of stagnation and now decline, Consumer is absolutely dead in the water because of the audio-visual limitations of human senses and a severe lack of disposable income for consumers, and communications is now re-entering stagnation because of the decline in pressure on the backhaul, cascading thru enterprise networking and storage, because of the rolling over of both smartphone and mobile computing markets, both of which are on the edge of saturation. Industrial is too fragmented to compensate for this, and automotive is not really a fresh avenue for growth, as it is saturating as well in terms of electronics content in addition to stagnating because of weakness in consumer disposable income.
      In summary: silicon has run its course. We need something new - organic plastics, carbon nanotubes, quantum computing or another process technology. All of these have been prototyped and can make digital gates. In fact, Stanford built a functional 4004 with quantum computing technology in a lab. These technologies offer applications in sensors, textiles and other things which none of us have dreamed of yet - things that silicon cannot do effectively.
      Disruptive invention for High Tech will HAVE to start at the chip level - the base level for everything in Electronics. From there, it will fan out chaotically or, if you will, fractally. It will also have revolutionary effects on how High Tech organizations work and organize themselves.
      Without such base level Disruptive Inventions as an engine for change, Silicon Valley will go the way of the Pennsylvania, Michigan, Ohio and Indiana steel towns, the northern NJ fabric mills and all the rest of the old US industrial belt that began rusting out in the 70′s.

  2. peter gasperini

    I predict an absolutely existential crisis for High Tech because of this. Consider: since the first real pioneering work in the 60′s and 70′s, 95% of everything Silicon Valley has done has been Evolutionary - modify, enhance, improve & innovate based on moving to the next node for more features and improving the 3 P’s (power, performance, price.) Management techniques, organizational hierarchies, strategies, operational norms and tactics have all reflected this for the last 30+ years. But to prevent Silicon Valley from turning into a Rust Belt, “innovation” will have to become a four letter word & give way to something truly, deeply scary for Silicon Valley companies - disruptive INVENTION.

  3. Ma Img

    Poet Technologies has patents and working products (PET) using Gallium Arsenide that can increase the processing power by a factor of 50 and reduce the power consumption to 10% of current chips. They can also have optical and digital circuits on one chip (POET). The chips can be produced on existing fab facilities without expensive upgrades.
    Check out

  4. Turr

    The answer to Moores law is POET, PTK.V … the game changer… have been told . whether you want to take advantage of this advice is up to you and it’s happening right now. They will be presenting at the GSF next week in Sinapore.

  5. Deepak Sekar

    TSMC says 20nm will be a “long-lived node”, where the cost per transistor reaches a minimum value. However, IDMs like Intel claim Finfets on a wafer cost basis still allow cost per transistor scaling… is TSMC taking advantage of supply-demand dynamics to charge the world for Finfets? No foundry other than TSMC seems to have competitive Finfet offerings now…

    1. funguy

      TSMC’s 20nm process is planar… Everyone else’s will be as well (besides Intel of course) or it will be skipped directly to 14/16nm FinFet.

      1. Sang Kim

        Where can find TSMC’s 20nm planar transistor performance data such as transistor transfer characteristics? Are they published somewhere such as IEDM or VLSI? Thanks

  6. Zvi Or-Bach

    Yes, dimension scaling is surely going forward to 20 and 14 nm but the cost of end product will be higher and for most application quite a bit higher. Moore’s Law was about cost and the best integration cost would be at 28 nm. According 28 nm is the last node of Moore’s Law.

  7. Brian Boerman

    … or maybe it’s possible there was a sea change in semiconductor technology evolution — away from a focused pursuit of area scaling, and more towards very low power. a finfet should offer dramatically reduced sub-threshold leakage, and that’s compelling with or without area scaling. that doesn’t mean that moore’s law died. it means that the marketplace is driving technologies along other vectors.

  8. Zvi Or-Bach

    Yes, progress has not died and hopefully never will. But when we refer to Moore’s Law we are referring to specific observation he made in 1965 as one can see at the link and reference in the start of the blog. That one has stopped at 28 nm.

  9. Byungchun Yang

    Zvi has been repeatedly saying that Moore’s law is talking about the cost benefit earned by miniaturizing devices, and the law has ended at 28nm even if we can still make the device size smaller than those of 28nm node rules. I agree with his idea since nothing can last forever. For example, people are trying to use air gap as an ultimate dielectric. But, what can you do with the heat accumulation in the device? Do you think the air gap, a nothing, can support the whole device structure? I mean everything is hitting the limits set by the nature!

    Since cost is the important factor in the Moore’s Law discussion, we need to pay attention on the production yield, a biggest factor that can impact on the production cost. The exponential RC increase may be influenced by exponential increase of R with shrinking via/contact area, and any further complications, such as tiny impurities (contaminants) at the via bottom will make R even higher. A tiny dislocation of via that reduces the via contact area will have enormous impact to the production yield. These things were not seen in the larger generation devices, but we will see more of these in the future node generations. Please take a look at my patent US 8, 207,060 that stipulates how to make firm via/contact to secure lowest via resistance as possible, while removing impurities/contaminant from the via bottom, and still make via/contact engaged3 dimensionally with lower level conductor . BC Yang

  10. Bill Kohnen

    Silicon Valley all ready moved on from semiconductors. Software rules with IoT companies following close behind and Google and Apple in their own space. Some even predicting Intel moves it’s corporate HQ out of Santa Clara in 5 years.

  11. Array

    This professional report makes me interested. The cost per gate is related to gate density, device size, the yield of each technology node as shown in the slide dones by Dr. Handel Jones. As the process control becoming challenge for advance process like 16/14nm FinFET, foundry will increase more design margin to increase yield rate at this moment. This might make 16/14nm FinFET not the cost effective one at this moment. Will it become better? No body knows, however, there are lots of RD working harder for that target.

  12. Hans J Weedon

    Hi you all.
    I was lucky enough to be at the Solid state conference in Philadelphia in 1966 and was in the audience where Dr More presented his paper defining Moore’s Law. A comment from the audience then was ” Nobody is going to tread those memory cores for less than 0.1Cents per bit. The law can not continue.” Dr Moore’s comment was: “Then we know one thing: Memories for computers will not be threaded ferrite cores in the future” Dr More was right.
    We are not going to use the same technology to continue More’s Law. There is going to be something else. Believing that pushing present tecnology forever is a myopic point of view. I have no idea what that new technology is going to be, I just know from historical extrapolation that it is going to happen. More’s Law has ben declared stopped before but picked up agan then, and that will happen again.


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


New Kimtech Pure G3 EvT nitrile gloves
04/03/2014Kimberly-Clark Professional has introduced a new glove that is designed to provide process protection for the semiconductor and electronics industries....
UVOTECH releases UV-Ozone Cleaning System
04/03/2014Using a UV-Ozone Cleaner, near atomically clean surfaces can be achieved in minutes without any damage to your devices. ...
NanoWorld AG introduces ultra-short cantilevers for high-speed atomic force microscopy
03/11/2014After a very successful beta-testing phase, six types of AFM probes for high speed scanning will be commercially a...