Jet Dispensing news and technical articles from Solid State Technology Magazine. Search Jet Dispensing latest and archived news and articles
The PicoDot jet dispensing system brings new capabilities to EFD's line of precision fluid dispensing systems. Because the PicoDot systems do not contact
March 3, 2011 -- Nordson ASYMTEK, dispensing, coating, and jetting technologies provider, introduced jet dispensing for manufacturing of side-view LEDs. The Spectrum S-920N fluid dispenser jets 0.1 to 0.2mm dots through windows
Non-traditional Applications of Jet Dispensing by George A. Riley, Contributing Editor While jetting ..... individually-dispensed seals. The higher speed of jet dispensing substantially lowers seal dispensing costs by replacing
(April 13, 2007) Carlsbad, CA Asymtek, a Nordson company, is sponsoring a conformal coating and jet dispensing workshop on Thursday, May 3 at the Doubletree Hotel in Orlando, FL. The workshop will focus on electronics assembly for military and industrial applications and will feature speakers ...
applications are accomplished with needle and jet dispensing techniques and equipment. Needle dispensing has ..... of four, there would be 4× fewer defects. Jet dispensing process Jet dispensing is completely different from needle dispensing
conjunction with the success of jet dispensing underfill are making this procedure ..... shield, holes can be smaller for jet dispensing than needle dispensing. Flow ..... One of the big advantages of jet dispensing is that by using patented dot-on
operations on more densely populated substrates. The substrate is scanned in one pass to locate fiducials prior to the jet dispensing operation. The camera is always in motion, snapping images on the fly. It is reportedly up to 5.5 times faster
fluxing operation to dedicated jet - dispensing systems. Because dipping operations ..... within a dedicated closed-loop jet - dispensing system virtually eliminates the ..... to a dedicated selective flux jet dispensing system. The improvement on ROI
needle dispensing, to control fillet size can help reduce the number of passes. 1 Figure 3 shows jet dispensing of underfill. Figure 3. Jet dispensing the underfill, rather than needle dispensing, can avoid some causes of voiding under the die
runs for clinical tests or FDA certification, as well as for mass production of lab-on-a-chip test kits. " Jet dispensing technology creates new possibilities for lab-on-a-chip applications," said Jim Klocke, senior business development