Xradia has unveiled its latest micro computed tomography (CT) 3D X-ray imaging system, the VersaXRM, targeting gaps in the semiconductor, materials science, geomaterials, and life sciences market segments. Kevin Fahey, VP of marketing at Xradia, told SST that the new system is able to provide a large working distance (i.e., the distance between the source spot and rotation axis of the sample) at high resolution (non-destructive).
The company claims the system can handle a >10× larger sample size for imaging at the same resolution as conventional systems. Large working distances are important to these market segments as they enable in-situ study using environmental chambers or load cells as well as study under varying environmental conditions.
Figure 1.. Maintaining resolution across a large working distance. (Source: Xradia)
Complex 3D packaging has generated an additional class of defects that come about because of the new solder and dielectric materials, and geometries (e.g., sub-micron voids and cracks). These defects are difficult to detect inside an intact package.
Figure 2. Resolution working distance benefits of microscope design. (Source: Xradia)
Fahey explained how the new platform uses geometrical magnification in tandem with an X-ray microscope. Conventional microCT systems use only geometric magnification technology. By coupling geometrical magnification and optical magnification, "the combination gives very high resolution and allows the sample to sit in an environment where it is not overly sensitive to position away from the source, so we can use larger samples, or larger source-to-sample distances while maintaining high resolution," he said. Modest geometrical magnification (small cone angle) works in tandem with high optical magnification.
There are many different elements that contribute to resolution: a combination of spot size of the source, the geometry of the system, the resolution of the camera, the scintillator material, vibrations in the system, any thermal variance, and so forth. "Because it's difficult to test and specify resolution, it's commonplace to focus on one of these elements as the dominant factor," noted Fahey. Conventional geometric projection systems tend to be overly sensitive to spot size, called spot blurring (fringes around the sample), he explained. In comparison, the new system is not sensitive to spot size, which means larger spot sizes can be used. In turn, this means larger sources, which are inherently more stable, can be used, improving reliability.
So how does this all translate into throughput of a typical 3D IC package failure analysis? Measurements of individual 2D images take only a few seconds, according to Fahey, while high-resolution 3D measured in ~1-in. samples takes one to a few hours to collect data spanning a full 3D tomography. — Debra Vogler, senior technical editor