Linde adds China N2O plant, expands display gases reach in Asia

09/25/2012

September 25, 2012 - Linde Electronics, a unit of the Linde Group, has added a new high-purity nitrous oxide (N2O) plant in Zhenjiang, Jiangsu Province, China to help support increased adoption of metal oxide transistors by display manufacturers.

The new plant follows an expansion of a plant in Taiwan and another one being built in Korea; the two plants in China will be managed by Linde LienHwa, a joint venture with LienHwa MiTAC Group in Taiwan. Linde and LLH are currently running six N2O plants in Asia with a capacity of more than 3,000 tons per year; the three new plants will boost design capacity to more than 10,000 tons per year.

Improving electron mobility in transistors is crucial in bringing higher resolutions and higher frame rates to TVs, mobile and computing devices. Making next-generation ultrahigh-definition 3D TFT/LCD and OLED displays is currently expensive, requiring the use polysilicon transistors which cost twice as much as those using amorphous silicon. Replacing polysilicon with metal oxide can increase electron mobility by a factor of up to 40 compared with conventional technology, at a comparable cost. Metal oxide transistor manufacturing requires high volumes of high-purity N2O to create functional layers of the microscopic thin-film transistors required to control each of the millions of pixels that make up the visible image.

The metal oxide transistors also allow more light to pass from the backlight through the backplane, reduce power consumption, and increase battery life of mobile devices. Moreover, they also allow the higher currents needed to drive OLEDs. Most display makers have or are working on products with metal-oxide transistors -- Samsung and LG both have 55-in. OLED TVs, and Sharp has begun commercial production of metal oxide displays in its Kameyama plant.

"The shift from silicon to metal oxide transistors would not be possible without a secure supply of high-purity N2O, which highlights the critical role that specialist gases play in enabling the development of next-generation consumer electronic devices," stated Andreas Weisheit, head of market development for flat-panel displays at Linde Electronics.


Visit our new Displays Manufacturing Channel on Solid State Technology and subscribe to our Displays Digest e-newsletter!

Font Sizes:

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. 


VIDEOS

Electroiq 2 EIQ2

TECHNOLOGY PAPERS

Automated Test Creation for Mixed Signal IP using IJTAG

The creation of test patterns for mixed signal IP has been, to a large extent, a manual effort. To improve the process used to test, access, and control embe...

Faster Time to Root Cause with Diagnosis-Driven Yield Analysis

This whitepaper describes the benefits of implementing a diagnosis-driven yield analysis flow using the Tessent® Diagnosis and Tessent YieldInsight® software...

WEBCASTS

Innovation in Semiconductor Manufacturing Instrumentation

As the industry is incorporating more MEMS devices with integrated magnetic sensors, they are encountering challenges that cannot be overcome with ...

3D and 2.5D Integration: A Status Report Live Event

This webcast will explore the present status of 2.5 and 3D integration, including TSV formation.

Questions and answers on FD-SOI

Fri Jan 04 14:56:00 CST 2013

Present your ideas at The ConFab in 2013

Mon Nov 26 09:04:00 CST 2012

The ConFab 2013 countdown begins

Thu Aug 09 16:18:00 CDT 2012

The ConFab: Big data is here

Sun Jun 03 19:19:00 CDT 2012

Oh, snap!: Pics from The ConFab

Sun Jun 03 19:09:00 CDT 2012

SUBSCRIBE

LATEST ISSUE

Volume 56, Issue 1

Article Archive for Solid State Technology.

© 2013. PennWell Corporation. All Rights Reserved. PRIVACY POLICY | TERMS AND CONDITIONS