IEDM keynote: It tastes like chicken

Attendees at this year’s International Electron Devices Meeting (IEDM) were delighted and perhaps somewhat horrified when the plenary speaker popped some electronics gear in his mouth and proclaimed, “It tastes like chicken!” The speaker, John Rogers from the University of Illinois at Champaign-Urbana, was demonstrating the edible nature of what he called transient electronics, which are designed from elements that rapidly decompose and are harmless to the human body and to the environment. One possible application of such bio-integrated electronics: They could be placed below a suture and provide enough heat through a resistive element to kill bacteria over a two week period. Bacteria sewn into the body during an operation are often the cause of a return trip to the hospital and delayed recovery.

He demonstrated that a very thin layer of silicon will dissolve in water fairly rapidly, in a matter of hours, turning into a salicylic acid. Circuits were completed with silicon dioxide as a gate dielectric and insulator and Manganese as the interconnect and resistor material. Levels were well below the FDA’s recommended daily allowance. Silk, already approved by the FDA for such applications, was used as the substrate. “You don’t want to chew,” Rogers quipped during his demonstration.

He said other applications of transient electronics include the use of sensors in chemical spills, which would monitor the presence of the chemical over time and then dissolve away, and even in consumer electronics, where lifetime would be measured in years instead of weeks.

Rogers also described another class of bioelectronics he called silicon membranes. By making silicon-based electronics thin enough, they can be stretchable. With a serpentine design, an applied strain of 30% induces strains that are less than 0.65%. These devices can conformally laminate onto the surface of the skin, in a manner that is mechanically invisible to the user, much like a temporary transfer tattoo. The systems, referred to as epidermal electronics, attach intimately and physically couple to rough skin surfaces, via van der Waals forces alone, with the ability accommodate natural and induced motions, Rogers noted in the accompanying paper.

Other bioelectronic applications include brain surgery, interfaces for human/computer control systems, skin-based physiological status monitors, high resolution electrical mapping systems for electrocorticography, and “instrumented” multifunctional balloon catheters for cardiac ablation therapy.

Rogers provides an overview of transient applications in this video and more details on his website.

Font Sizes:

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.


VIDEOS

Electroiq 2 EIQ2

NEW PRODUCTS

EV Group rolls out EVG120 processing system

May 7, 2013 EV Group (EVG), a supplier of wafer bonding and lithography equipment for the MEMS, nanotechnology and semiconductor markets, t...

Quartz Imaging introduces automated measurement for semiconductor images

April 30, 2013

It can be very time-consuming for engineers to measure the various features of an X-SEM image of a semiconductor device.

Axcelis launches Purion XE high energy implanter

April 30, 2013 Axcelis Technologies, Inc. today announced the introduction of the Purion XE next generation single wafer high energy implanter...

EMS debuts low-cost conductive LED die attach adhesive

April 29, 2013 Engineered Material Systems debuted its CA-105 Low-Cost Conductive LED Die Attach Adhesive for attaching LEDs and other small s...

TECHNOLOGY PAPERS

Rapid Defect Indentification with Layout-Aware Diagnosis

Scan logic diagnosis is a powerful tool to help failure analysis engineers determine the root cause of a failing die. Yield engineers, on the other hand, are...

Flip Chip Devices get Flat and Happy

Thin is definitely in, but what our modern flip chip devices really want is to be flat and happy! As flip chip die have become increasingly thinner in recent...

WEBCASTS

Surface Cleaning and Preparation

This introduction requires the development of new critical and selective cleans tackling galvanic corrosion, pattern collapse both in FEOL and BEOL...

450mm Status Report

Hear from the G450C General Manager, Paul Farrar Jr., on the current status of activities, key milestones and schedules, and imec’s senior business...

SUBSCRIBE

LATEST ISSUE

05/01/2013
Volume 56, Issue 3

Article Archive for Solid State Technology.

© 2013. PennWell Corporation. All Rights Reserved. PRIVACY POLICY | TERMS AND CONDITIONS