Semiconductor equipment demand: Shades of 2009?

11/16/2012

November 16, 2012 - The latest monthly numbers are in for semiconductor manufacturing equipment demand, and they're not pretty: lows in both orders and sales not seen since the last major downcycle three years ago, and the short-term comparisons continue to widen.

North America-based manufacturers of semiconductor manufacturing equipment reported bookings (orders) of just $743.2M in October, down -18% from September and roughly -20% from a year ago. Billings (sales) came in at $986.5M, off by -15% M/M and nearly -22% Y/Y. (Both are three-month moving averages.) SEMI also revised downward its September data: Bookings lowered to $912.8M (they had been $952.9M), and billings down to $1164.4M (vs. $1177.4M). The book-to-bill (B:B) came in at an anemic 0.75, meaning that $75 worth of orders came in for every $100 shipped out. (A B:B above 1.0 would indicate a good sign of more business coming in; a number below 1.0 means the opposite, and a number substantially below 1.0 and sinking for a while, well...)


Here are some chilling metrics to illustrate just how sour the market for chip tools has become as we head to the finish line of 2012. (All data is compiled from SEMI's historical tallies dating from Jan. 1991)

  • Bookings are at their lowest point since October 2009. Billings haven't been this low since January 2010. Since peaking in May, equipment bookings have been slashed by half (-54%) and sales are off by more than a third (-36%).

  • For the ten months through October, equipment orders were tracking down -8.5% from the same period in 2011 to $12.6B, and sales were down -15.7% at $13.3B.

  • Bookings have declined by double-digits for five consecutive months (-11% to -18%), which hasn't happened since the grand old days of December 2000-April 2001. Except for a single month of mathematically zero growth (April), bookings have declined Y/Y for 16 out of the past 17 months. (This might say more about the industry's reliably brutal cyclicality than current malaise; May 2011 was the end of a 19-month period in the black, which was preceded by a 29-month trip through the doldrums.)

  • The B:B ratio has been in freefall since April when it was well above the parity level (1.12) -- that's six straight months of decline, which according to SEMI's data hasn't happened since late 2010. (We've had several five-month slides in the past two years.)

Denny McGuirk, president and CEO of SEMI, labeled the environment for semiconductor industry investments as "muted" entering the final quarter of 2012, though he stated that "investments in leading-edge technologies will continue to drive spending in the near-term." The outlook for 2013 will clear up shortly as chipmakers crystallize their 2013 capex plans, he added. (Note that with about six weeks remaining, any lack of clarity into 2013 planning doesn't exactly inspire confidence.)

SEMI will present its updated consensus forecast in conjunction with SEMICON Japan on Tuesday Dec 4 (technically it'll be 11am local time, which is the wee hours late Monday/early Tuesday morning here in the US). One can reasonably expect some drastically different numbers from its current official forecast, issued at SEMICON West in July, which predicted an overall -2.6% decline for the year in global frontend + backend equipment. Hopefully there will be some improved clarity in these coming weeks.

Font Sizes:

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. 


VIDEOS

Electroiq 2 EIQ2

TECHNOLOGY PAPERS

Automated Test Creation for Mixed Signal IP using IJTAG

The creation of test patterns for mixed signal IP has been, to a large extent, a manual effort. To improve the process used to test, access, and control embe...

Faster Time to Root Cause with Diagnosis-Driven Yield Analysis

This whitepaper describes the benefits of implementing a diagnosis-driven yield analysis flow using the Tessent® Diagnosis and Tessent YieldInsight® software...

WEBCASTS

Innovation in Semiconductor Manufacturing Instrumentation

As the industry is incorporating more MEMS devices with integrated magnetic sensors, they are encountering challenges that cannot be overcome with ...

3D and 2.5D Integration: A Status Report Live Event

This webcast will explore the present status of 2.5 and 3D integration, including TSV formation.

Questions and answers on FD-SOI

Fri Jan 04 14:56:00 CST 2013

Present your ideas at The ConFab in 2013

Mon Nov 26 09:04:00 CST 2012

The ConFab 2013 countdown begins

Thu Aug 09 16:18:00 CDT 2012

The ConFab: Big data is here

Sun Jun 03 19:19:00 CDT 2012

Oh, snap!: Pics from The ConFab

Sun Jun 03 19:09:00 CDT 2012

SUBSCRIBE

LATEST ISSUE

Volume 56, Issue 1

Article Archive for Solid State Technology.

© 2013. PennWell Corporation. All Rights Reserved. PRIVACY POLICY | TERMS AND CONDITIONS