North American semiconductor equipment ends 2011 with another book-to-bill climb

January 23, 2012 -- North America-based manufacturers of semiconductor equipment posted $1.16 billion in orders in December 2011, $1.32 billion in billings, and a book-to-bill ratio of 0.88, according to SEMI's December Book-to-Bill Report. The book-to-bill ratio has been climbing since September 2011. In December 2011, bookings climbed back above the $1 billion mark.

The three-month average of worldwide bookings in December 2011 was $1.16 billion. The bookings figure is 18.5% above November 2011 and 26.7% below the $1.58 billion in orders posted in December 2010.

The three-month average of worldwide billings in December 2011 was $1.32 billion. The billings figure is 11.8% more than the final November 2011 level and is 25.2% less than the December 2010 billings level of $1.76 billion.

Bookings for semiconductor equipment are increasing, said Dan Tracy, senior director of Industry Research and Statistics at SEMI, adding, "Recent capital spending announcements by leading device manufacturers indicate the potential for continued improvement in 2012." Samsung and Intel both announced ambitious 2012 capex plans this month.

The SEMI book-to-bill is a ratio of three-month moving averages of worldwide bookings and billings for North American-based semiconductor equipment manufacturers. Billings and bookings figures are in millions of US dollars. Source: SEMI January 2012.
  Billings (3-mo. avg) Bookings (3-mo. avg) Book-to-Bill
July 2011 
1,521.2 1,298.2 0.85
Aug 2011
1,457.7 1,162.4 0.80
Sept 2011
1,313.5 926.5 0.71
Oct 2011
1,258.3 926.8 0.74
Nov 2011 (final)
1,176.7 977.2 0.83
Dec 2011 (prelim) 
1,315.9 1,157.8 0.88


A book-to-bill of 0.88 means that $88 worth of orders were received for every $100 of product billed for the month. The data contained in this release were compiled by David Powell, Inc., an independent financial services firm, without audit, from data submitted directly by the participants. SEMI and David Powell, Inc. assume no responsibility for the accuracy of the underlying data.

The data are contained in a monthly Book-to-Bill Report published by SEMI. The report tracks billings and bookings worldwide of North American-headquartered manufacturers of equipment used to manufacture semiconductor devices, not billings and bookings of the chips themselves. The Book-to-Bill report is one of three reports included with the Equipment Market Data Subscription (EMDS). SEMI is a global industry association serving the nano- and micro-electronic manufacturing supply chains. For more information, visit www.semi.org.

Subscribe to Solid State Technology

Font Sizes:

POST A COMMENT

Easily post a comment below using your Linkedin, Twitter, Google or Facebook account. Comments won't automatically be posted to your social media accounts unless you select to share.


VIDEOS

Electroiq 2 EIQ2

NEW PRODUCTS

Spectra-Physics introduces industrial picosecond laser

May 10, 2013 Spectra-Physics, a Newport Corporation brand, introduces Spirit ps 1040-10, an industrial-grade picosecond laser for precision ...

Multitest announces ecoAmp for high-power applications

May 8, 2013 Multitest announces that its ecoAmp high power Kelvin contactor successfully passed a challenging evaluation for an automotive ...

EV Group rolls out EVG120 processing system

May 7, 2013 EV Group (EVG), a supplier of wafer bonding and lithography equipment for the MEMS, nanotechnology and semiconductor markets, t...

Quartz Imaging introduces automated measurement for semiconductor images

April 30, 2013

It can be very time-consuming for engineers to measure the various features of an X-SEM image of a semiconductor device.


TECHNOLOGY PAPERS

Rapid Defect Indentification with Layout-Aware Diagnosis

Scan logic diagnosis is a powerful tool to help failure analysis engineers determine the root cause of a failing die. Yield engineers, on the other hand, are...

Flip Chip Devices get Flat and Happy

Thin is definitely in, but what our modern flip chip devices really want is to be flat and happy! As flip chip die have become increasingly thinner in recent...

WEBCASTS

Surface Cleaning and Preparation

This introduction requires the development of new critical and selective cleans tackling galvanic corrosion, pattern collapse both in FEOL and BEOL...

450mm Status Report

Hear from the G450C General Manager, Paul Farrar Jr., on the current status of activities, key milestones and schedules, and imec’s senior business...

Join The ConFab discussion

Tue Feb 26 11:27:00 CST 2013

Questions and answers on FD-SOI

Fri Jan 04 14:56:00 CST 2013

Present your ideas at The ConFab in 2013

Mon Nov 26 09:04:00 CST 2012

The ConFab 2013 countdown begins

Thu Aug 09 16:18:00 CDT 2012

The ConFab: Big data is here

Sun Jun 03 19:19:00 CDT 2012

SUBSCRIBE

LATEST ISSUE

05/01/2013
Volume 56, Issue 3

Article Archive for Solid State Technology.

© 2013. PennWell Corporation. All Rights Reserved. PRIVACY POLICY | TERMS AND CONDITIONS